PORSCHE 911 EXHAUST HEADERS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
"brombacher" racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weights 6 kg
- 33 kg savings over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 108 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- no dme programming neces...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$11,661.10
Make a selection
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
Special order item !
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (includes FVD software, sport airfilter and exhaust):
Max. Power - 283kw (3...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,826.40
Make a selection
Also out of the Brombachercollection. This 996 GT3 GT exhaust system features a 70mm diameter with 200 cell sport catalytics. This system is made out of stainless steel. We can now offer more power for your GT3 due to the larger 70mm diameter especiall in the lower rpms and less weigth. This complete system includes: - headers - 200 cell sport cats - mufflers - please send us your mounting brackets to be modified or order 1 x bes 996 000 000.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 GT3 2003-05
From $8,457.90
Make a selection
- equal length headers with long tube design
- 200 cell German hjs "hf" sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- rsr style connections and quick release clamps
- quad 3.5" (90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only.
- weighs 62 lbs.(28,0 kg).
Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany.
Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l:
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7900rpm
Acceleration 0-100km/h - 4.4s
Our "brombacher" system use...(choose a part on the right to read more)
General Fitment 911 2005-08
From $8,190.60
Make a selection
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- 1,000 degree celcius titanium
- equal length header set up for maximum torque gain
- weighs 48 lbs. (21,9 kg),
- 38.5 lb (17,5 kg) weight savings over stock
- includes all necessary clamps and mounting brackets
- 2 x 3.5"(90mm) blue flamed titanium center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhaus...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$20,056.30
Make a selection
Equal length, long tube, mandrel bent tubing with a merge collector to further improve exhaust gas flow, reduce system back pressure and optimize exhaust gas scavaging and cylinder filling. Facts: - equal length headers with long tube design - 1.77" (45 mm) primaries - 2.5 tubing (63.5 mm) collector - t316 lightweight stainless steel - made in Germany for 997.1 models without the Porsche sport exhaust (pse). These headers are manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. They are Germany's premier racing manufacturer and have exhaust systems running in these series: Porsche super cup, Carrera cup deutschland, adac GT masters, alms / lms, vln, fia GT, imsa and rall...(choose a part on the right to read more)
General Fitment 911 2005-08
From $1,054.70
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$4,072.72
Make a selection
Brombacher edition valved mufflers are the perfect compromise for you and your loved ones. Rich, deep race car tones with the valves open and soft subtle, completely stock sounds with them closed.
- + 15 crank hp & + 14 crank torque
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress)
- 22 lbs. (10 kg) weight savings
- replaces OEM valved Porsche® sport exhaust (pse).
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- intoxicating growl at idle, partial throttle and wide open throttle with the valves open. Factory quiet with them closed!
- no dme programming necessary
- includes quad 3.5 ? Tips.
- made in Germany
In our relentless quest to meet all of our customers...(choose a part on the right to read more)
General Fitment 911 2009-12
From $3,174.70
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,731.90
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version) in titanium
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 17 lbs. (7.7 kg)
- replaces stock side mufflers and stock center muffler
- 47 lbs (21.3 kg) savings over stock system!
- 1,000 degree celcius titanium
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
All titanium systems not created equal the titanium that we use is the highest grade avail...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$6,605.50
Make a selection
- + 25 crank hp & + 19 crank torque (manufacturer estimate, dyno testing information will be available shortly)
- 200 cell high flow, tri metal German hjs sport catalysts. Cats are located behind the muffler for even greater hp & torque.
- equal length header set up with merge collector for maximum torque gain
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 64.3 lbs. (29,2 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 2 3/4"(70mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- 105.7 db
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programm...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$9,179.50
Make a selection
M&m street-sport muffler system for 2009- 997.2 / 997.2s
Facts:
- + 15 crank hp & + 13 crank torque
- 2 ½” (63.5 mm) diameter tubing (reduces thermal stress)
- replaces OEM primary and secondary mufflers
- reuses OEM headers and 600 cell cats (no cel, retains OEM software)
- weighs 20.94 lbs. (9.5 kg)
- 33 lb. Weight savings over factory system
- t 316 stainless steel for improved durability over t 304
- uses the spring lock race system design to dampen vibration
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
-reuses factory tips or any aftermarket tip designed to fit OEM exhaust (3.6 l models will require 3.8 l tips due to diameter diff...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,660.90
Make a selection
For 997-2 with OEM or valved Porsche® sport exhaust (pse).
Facts:
- equal length headers with long tube design
- 200 cell hf German hjs tri metal sport cats
- 2 3/4" tubing (70mm)
- replaces the primary “center” muffler and connects to the factory Porsche® pse muffler's directly.
- made in Germany
Power:
- 997.2 (3,6l) = + 20 crank hp (15 kw) & + 15 crank torque (20 nm)
- 997.2s (3,8l) = + 23 crank hp (18kw) & 22 crank torque (30nm)
- with FVD flashclient software = + 37 crank hp (28kw) & + 30 crank torque (40 nm)
Tech tip:
Dme (catalytic adjustment) needs to be programmed!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be ca...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,549.60
Make a selection
Billy boat performance exhaust has had a deep commitment to build quality products. With over 3 generation of fabrication and racing experience going into the development of every part b&b makes along with use only the finest t304 stainless steel materials it is easy to see why b&b has been an industry leader for over 20 years. B&b designs every system for increased performance, a distinctive tone that they have spent years perfecting and an appearance that will set your vehicle apart.
Features:
Header with heat exchangers
General Fitment 911 1965-69
$2,378.17
Make a selection
B&b exhaust system Porsche 996 Carrera 99-03
With an increased flow capacity, the billy boat performance exhaust system introduces increased mid-range and top-end performance and lends a crisper, more commanding exhaust note without being intrusive. All emission devices are retained and the system is obd-ii compatible. There is no modification necessary for installation as the headers and mufflers are a direct replacement for the factory exhaust equipment.
Available with twin oval tips (fpor-2000), twin elliptical tips (fpor-2005), or quad tips twin turbo style (fpor-2010). Please select tip style below.
This product is made to order, please allow 7-10 days prior to shipment.
*cont...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,925.18
Make a selection
"brombacher" exhaust system for 997.2 GT3/rs with valves for the best of both worlds.
facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- valved system with sound switch for quiet sound and export sound for the track.
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 90mm center exit tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open t...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $8,880.30
Make a selection
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4 and Porsche 3.6l turbo. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every ...(choose a part on the right to read more)
General Fitment 911 1989-94
$3,375.28
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
Their newly designed mufflers are hand built with high quality materials to give you years of performance for your Porsche c2/4. All of their mufflers are constructed with t304 stainless steel with radiused end-plates, and gussetted joints for superior strength. Twin inlet mufflers, designed specifically for b&b headers, have a special slip-joint absorbing expansion and contraction during times of severe heat. Special race and street applications for your Porsche c2/4 are available with your choice of tips styles. Billy boat performance exhaust has a deep commitment to build quality products. With over 3 generations of fabrication and racing experience going into the development of every part that b&b makes, al...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,640.68
Make a selection
Product details:
Complete high performance exhaust system provides loud & aggressive cup car sound with dual outlets
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-major improvement in power throughout the rpm range.
-saves 43 lbs from the rear of the vehicle
-loud and aggressive cup car sound. Recommended for track use only!
-constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel tubing
-rsr long-tube headers feature equal length primary pipes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors
-dual outlet system comes with all required hardware
-available optio...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
From $2,795.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 911 turbo 930; includes dual outlet muffler with dual or quad style deluxe tips, sport headers with heat and air intake system.
Includes:
-911 turbo (930) dual outlet muffler (incl. Deluxe dual or quad style tips)
-911 turbo (930) sport headers with heat
-911 turbo (930) air intake system
Features:
-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-increases horsepower and torque by 46 whp and 33 ft-lbs
-dramatically improves sports car sound with a deeper exhaust note.
-constructed from t304 stainless steel, 14-16 gauge c.n.c. Mandrel bent high v...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
From $4,050.00
Make a selection
Fabspeed's 991 Carrera performance package replaces the restrictive OEM side mufflers and center muffler for a deeper, throatier exhaust note and improved power and throttle response. The included sport headers replace the restrictive factory headers and cats with high-flowing performance headers and 200-cell hjs sportcats. Lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Features:
Saves 11.45 lbs. / 5.2 kg
Dramatic improvement in sports car sound and power throughout the rpm range
Constructed from high-quality 14-16 gauge c.n.c. Mandrel bent t304l st...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,421.85
Make a selection
B&b started from scratch to offer a complete high performance exhaust system for the Porsche 911. Extensive dyno testing on their in-house dynamometer afforded us impressive horsepower and torque gains throughout the entire power band. Headers and muffler are meticulously built by hand using t304 stainless steel for a lifetime of performance - guaranteed! Included in the kit is the header set, 1.625" or 1.75" primary tube diameter, with or without heat exchangers. Their proprietary twin inlet muffler built specifically for your street or race application is also included in this complete exhaust system. The kit for the naturally aspirated Porsche 911 includes all necessary hardware, gaskets and accessroies ne...(choose a part on the right to read more)
General Fitment 911 1984-86 911 1974-77
$3,579.69
Make a selection
Fabspeed exhausts are consistently one of the best performing exhaust with a great sound. The fit and finish of the fabspeed product place it among the more expensive brands but at a value price.
Features:
Saves 15 lbs./ 6.8 kg
Very aggressive exhaust note with the x-pipe race exhaust as this system replaces the side mufflers and center muffler
High quality 14-16 gauge c.n.c. Mandrel bent t304l stainless steel for maximum power and sound
Direct replacement for the stock/oem center muffler with valves and stock/oem side mufflers for a very aggressive and lightweight supersport exhaust system
Installs with the stock/oem headers with primary catalytic converters
Must us...(choose a part on the right to read more)
General Fitment 911 2009-12
$3,005.30
Make a selection
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,895.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|